secure your wifi
Do you have Super Booster WIFI Repeater and it’s not Not working properly? You might be annoyed to call the technician every time. But you can also fix it by yourself. Know-How to fix it when you know some tips and knowledge.
Super booster wifi repeater is a device used to boost the wifi range around your place which can be home as well as office. This device will throw the wifi signal around the too far range. Using this device the wireless internet area coverage is more and if you have a wide yard home or office in far places then you can use this device to maximize the wifi network coverage area.
In this article, we will look at the best ways to solve this problem for this reason and use a signal extender to easily connect to your Wi-Fi network. First, make sure you have connected it correctly according to the manual. Every Wi-Fi repeater comes with a connection diagram or steps to follow to get it working.
Why Super booster WiFi Repeater Not Working?
Reasons for a Wi-Fi repeater not working can range from incorrect settings to hardware issues. If the Wi-Fi repeater does not connect, make sure all wires are connected correctly. If everything is connected properly but the device is still not working, check your Wi-Fi settings. Wi-Fi repeater still not working? Restore the device to default settings and reconnect.
How to fix Wi-Fi Repeater not working?
To fix various PC problems, we recommend Restoro PC Repair Tool. This software repairs common computer errors, protects you from file loss, malware, hardware failures, and optimizes your PC for maximum performance. Fix PC problems and get rid of viruses in 3 simple steps.
Download Restoro PC Repair Tool that comes with patented technology. Click Start Scan to look for Windows issues that may be causing your PC problems. Click Repair All to fix issues affecting the security and performance of your computer. Installing a Wi-Fi repeater is a good idea when you need to cover a large area in your home with a Wi-Fi signal.
However, some users have reported that their super booster wifi repeater/extender will not connect. Sometimes the wifi works fine until I try to connect the extender. Then the device will tell you that it can’t connect to the network, or in some cases, it can’t connect at all. Source Vokeme.
What to do if the Wi-Fi extender does not work?
1. Reset Wi-Fi Repeater/Extender
The exact location of the reset button depends on the brand of the Wi-Fi extender. This is usually located near the Ethernet cable port on the back of the extender. It can be a button that can be pressed with a needle, or it can be a normal switch-type button as shown in the picture above.
To reset the Wi-Fi extender, press or toggle the reset button, wait 10 seconds, then turn it on or release it again. This will reset all your previous settings and allow you to modify them.
If your Wi-Fi repeater still does not work after the reset procedure, follow these steps:
2. Forget Network on PC:
- Press the Windows + I key combination to open Settings.
- Select Network and Internet.
- Select Wi-Fi in the left pane.
- Click Manage Known Networks.
- Click Wi-Fi Repeater/Extender and select Ignore.
- Click Forget and the network will disappear from the list. Go to the right corner of the taskbar and click the Wi-Fi icon.
- Search for the super booster wifi repeater network and reconnect.
3. Make sure your Wi-Fi repeater is on the same network:
Error code 50382 WM1. Check your router’s SSID and use another device (phone, tablet, etc.) to see if other similar networks are available. To change these settings, you will need to use your PC’s browser to access the IP address of the router settings provided by your Internet provider. You need to contact them.
The IPs of routers and extenders vary from company to company. Contact your internet provider for details. The internet provider will provide the router’s IP if you are not able to obtain it by yourself.
5. Check your hardware problems:
Physical hardware problems can happen to any device, and Wi-Fi repeaters are no exception. For example, the Ethernet port may be damaged. It might be due to long time use or by default you may get the device with the bad and nonfunctioning hardware
If you look at the front of the repeater, you can see that it has several LEDs. Make sure the LED is on and the correct color is indicated in the device documentation. Usually, the color should be green, white, or yellow.
If the LED does not illuminate, the super booster wifi repeater device is defective or there is a problem with the charger or power outlet. To conclude that it’s a repeater problem, you can check the power outlets of other devices to make sure they’re working properly.
Also, if your repeater has a hardware problem, you can send it to service or buy a new one if your warranty has expired. Otherwise, if there is a severe hardware problem you need to change this device.
Besides you can also know about Netgear Wifi Range Extender Setup
Conclusion
So these were the easiest 5 ways to fix your Super Booster Wifi repeater, if still, you face any problem or have any question about this please feel free to comment us. we will try to answer your best
About The Author
very useful